How to Jailbreak iPhone 13 Using Palera1n Tool


If you're trying to jailbreak your iPhone 13, the Palera1n tool can do the job — but it's not the simplest path. It requires a computer, a bit of technical comfort, and a good amount of patience. Below is a full walkthrough for using the Palera1n jailbreak tool.

palera1n online jailbreak for iPhone 13

Compatibility & Limitations (Important!)

Before you begin, it's important to know the Palera1n tool has some limitations:

  • Palera1n Online tool supports iOS 15 to iOS 18.5 , but Palera1n PC tool does not supports iOS 18 and latest.
  • Difficult to install — requires macOS or Linux (Windows users need a workaround)
  • Palera1n Online tool supports iPhone 13 every model. PC ToolNot available for all iPhone models — mainly works on A9–A11 devices, though some newer models (like iPhone 13) can be tricky and unstable. Also Palera1n supports iPhone 15 / iPhone 14 and older iPhone jailbreak.
  • Risk of data loss if not followed properly


Palera1n Online Jailbreak (No PC Required)

If the above sounds complicated (and it is), you’re not alone. Thankfully, there’s a MUCH easier alternative: Palera1n Online.

It works directly from your iPhone — no computer, no DFU mode, and no cables required. Best of all, it fully supports iPhone 13 running iOS 18.2, iOS 18.3, and iOS 18.4.

  • ✅ No computer required
  • ✅ Fully supports iOS 15 – 18.5
  • ✅ Super beginner-friendly
  • ✅ Just a few taps to jailbreak


Download Palera1n Online

Click the button below to get started:





Step-by-Step: Jailbreak iPhone 13 with Palera1n Online

Follow these simple steps to jailbreak your device using the Online method:


  • Step 1 Launch the Palera1n Online App

  • Step 2 Copy IPSW File from IPSW App
    • Open the Palera1n Jailbreak IPSW App (pre-installed in the tool).
    • Locate and copy the correct IPSW file that matches your iPhone 13 and iOS version.

  • Step 3 Paste IPSW in Online Terminal
    • Go back to the Palera1n Online Jailbreak App.
    • Paste the IPSW into the terminal box provided.
    • Tap "Run Jailbreak" and wait for the process to finish.

  • Step 4 Install Sileo Package Manager
    • Once the jailbreak completes, open the Palera1n Jailbreak App.
    • Tap on "Install Sileo" — this will give you access to jailbreak tweaks, themes, and apps.
      • Install Sileo


You're Done!


You’re now jailbroken using the easiest method available. You can explore thousands of tweaks and customizations safely with Sileo.

Step-by-Step: Jailbreak iPhone 13 with Palera1n Tool ( PC Method )

  • Step 1 Prepare Your Computer
    • Use macOS or Linux. Palera1n does not run natively on Windows.
    • Make sure Python 3, Homebrew, and libimobiledevice are installed.

      • bash

      CopyEdit

      brew install python libimobiledevice


  • Step 2 Download Palera1n Tool
    • Visit to our PC Download page and grab the tool
    • Clone it to your desktop:

      • bash

      CopyEdit

      git clone https://github.com/palera1n/palera1n.git


  • Step 3 Put Your iPhone into DFU Mode
    • Connect your iPhone 13 to your computer via USB.
    • Use a button combination to enter DFU mode (this is different from recovery mode).
      • Quick Volume Up → Quick Volume Down → Hold Side Button
      • Then hold both Volume Down + Side Button for 5 seconds
      • Release Side Button but keep holding Volume Down until the screen stays black

  • Step 4 Run Palera1n in Terminal
    • Once you're in DFU mode, navigate to the Palera1n directory and enter:

      • bash

      CopyEdit

      ./palera1n.sh -B -f

      Let the jailbreak process run. Your iPhone might reboot once or twice.


  • Step 5 Open Palera1n App and Install Sileo
    • After the jailbreak is complete, look for the Palera1n app on your device.
    • Open it and tap “Install Sileo” to get your jailbreak package manager.

Troubleshooting Tips

  • Jailbreak may fail on the first try — repeat the steps carefully.
  • Some apps might crash or reboot unexpectedly.
  • You may need to re-jailbreak after every reboot (semi-tethered).

Jailbreaking iPhone 13 Unlocks Sileo Access

Once you jailbreak your iPhone 13 using tools like Palera1n or Palera1n Online, you're not just gaining root access—you’re also preparing your device to install Sileo, the modern package manager that replaces Cydia on newer jailbreaks.


Why Sileo is Installed After Jailbreaking iPhone 13

Sileo isn’t bundled automatically with the jailbreak process. After jailbreaking, users must manually install Sileo through the Palera1n app. Sileo gives access to tweaks, themes, and third-party apps compatible with iOS 17 and 18, which are often used on iPhone 13.


Steps to Install Sileo on Jailbroken iPhone 13

Once your iPhone 13 is jailbroken:

  • Open the Palera1n App on your device.
  • Tap the “Install Sileo” button.
  • Wait for the process to finish—this will set up Sileo as your main package manager.
  • Launch the Sileo app and start adding sources and tweaks!

Fastest Way: Use Palera1n Online for One-Tap Jailbreak + Sileo

Don’t want to use a computer? Use Palera1n Online, a no-PC jailbreak method. After jailbreaking:

  • Open the Palera1n Jailbreak App.
  • Tap “Install Sileo”.
  • Done! Your iPhone 13 is now jailbreak-ready with Sileo installed.

iPhone 13 Jailbreak Doesn’t End with Palera1n

While Palera1n is a popular jailbreak tool for iPhone 13, it isn’t the only option. Some users face issues like complex setup or unsupported iOS versions. That’s where Palera1n alternative tools come in—especially for users on newer firmware or without a PC.


When to Consider Palera1n Alternatives on iPhone 13

Use an alternative if:

  • You're on iOS 18.2, 18.3, or 18.4, which Palera1n doesn't fully support
  • You want a no-PC jailbreak method
  • You’re new to jailbreaking and want a simpler process
  • Palera1n gives device-specific errors

Palera1n Online: The Best Alternative for iPhone 13

One of the most user-friendly options is Palera1n Online, a web-based jailbreak that doesn’t need a computer.

How to use it:

  • Copy the right IPSW file using the Palera1n Jailbreak IPSW App
  • Paste the IPSW into the Palera1n Online Jailbreak App terminal
  • Run the jailbreak process
  • Open the Palera1n app on your iPhone 13
  • Tap “Install Sileo” to finish

You're now jailbroken—with zero PC required.

Other Alternatives You Can Explore

Besides Palera1n Online, you can also look into tools like:

  • Dopamine Jailbreak (for rootless environments)
  • TrollStore (via TrollInstaller) for permanent sideloading (not full jailbreak)
  • XinaA15 (limited to specific iOS 15 versions on A15 devices like iPhone 13)

These tools vary by firmware, so always double-check compatibility.


Palera1n Repos Are Essential After Jailbreaking iPhone 13

After jailbreaking your iPhone 13 using Palera1n or Palera1n Online, you’ll need to add Palera1n-compatible repos (repositories) to unlock powerful tweaks, themes, and apps. These repos are what make the jailbreak truly useful.


How Repos Work on Jailbroken iPhone 13

Repos are sources you add in the Sileo app (installed after jailbreaking). They contain packages designed to customize your iPhone 13 and improve iOS 17–18 functionality.

Steps to Add Palera1n Repos on iPhone 13

  • Open Sileo on your jailbroken iPhone 13.
  • Go to the “Sources” tab.
  • XinaA15 (limited to specific iOS 15 versions on A15 devices like iPhone 13)Tap the “+” button to add a new repo.
  • Paste in a Palera1n-compatible repo URL (e.g., https://havoc.app, https://ellekit.space).
  • Full Repo List for Palera1n
  • Tap “Add Source” and refresh the packages list.
  • Now browse and install tweaks made for your iPhone 13’s firmware!

Use Palera1n Online for Quick Repo Access

Palera1n Online makes it faster to jailbreak your iPhone 13 and access Sileo. Once Sileo is installed:

  • Add repos with one tap.
  • No computer or terminal setup needed.
  • Perfect for beginners unlocking tweak power on iPhone 13.

Jailbreaking iPhone 13 Unlocks Access to Palera1n Tweaks

Once your iPhone 13 is jailbroken using Palera1n PC or Palera1n Online, you can install system-level tweaks that customize iOS 17 or 18 in ways Apple doesn’t allow. These tweaks are built specifically for modern jailbreaks like Palera1n.


How Palera1n Tweaks Enhance Your iPhone 13

Palera1n-compatible tweaks can:

  • Change your home screen layout
  • Add system-wide dark modes
  • Improve multitasking
  • Bring back old iOS features
  • Add new gesture controls

They’re lightweight, fast, and tailored to devices like iPhone 13.


How to Install Palera1n Tweaks on iPhone 13

  • Jailbreak your iPhone 13 using Palera1n or Palera1n Online.
  • Open the Sileo app (installed after jailbreak).
  • Add tweak repos like https://havoc.app or https://chariz.com.

    • Palera1n Support Tweak List

  • Search for a tweak (e.g., Cylinder Reborn, PowerModule, Mitsuha Forever).
  • Tap Install, then Respring your device.
  • The tweak will now be active!

Use Palera1n Online for Easier Tweak Access

With Palera1n Online, you can jailbreak without a PC and get straight to installing tweaks on your iPhone 13. It’s the easiest way to unlock custom features and visual enhancements in just a few taps.


All rights Reserved © palera1n.com